3M™ 2138 GP2/GP3 Particulate Disc Filter - pair

3M™ 2138 GP2/GP3 Particulate Disc Filter - pair

• Provides protection against: Particulates (P2/P3*), Ozone and Nuisance Level** Acid Gas & Organic Vapours with Low Vapour Pressure
• Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator
• Nuisance Levels are those levels below the Workplace Exposure Standard (WES)
• Protection Factors
• Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels

This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:

• With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
• With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 100 x WES
• Organic compounds with low vapour pressures (<1.3Pa @ 25 degrees Celsius) in concentrations up to 10 x WES
• Ozone up to 10 x WES
• Offers relief from acid gases and organic vapours at levels below the WES

Common Applications/Hazards:

• Made from 3M high performance filter media for effective filtration efficiency
• Lightweight and provides low breathing resistance
• Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators

Suggested Applications

• Common Applications/Hazards: For protection against toxic particles such as mould remediation. Also for nuisance level* acid gases and organic vapours with low vapour pressure <1.3 Pa @ 25°C